Home
About Us
Products
News
Contact Us
Home
News
News
High-throughput nanoindentation mapping of cast Inconel™718 nickelbased superalloy: influence of the Nb concentration(3)
Release time: 2022-01-14
Regarding the reduced elastic modulus, Fig. 5.d, e and f, the values did not follow the trend observed in the hardness maps (Fig. 5.a-c) and they appear to be constant for each grain and less sensitive to chemical segregations at the den...
Views
High-throughput nanoindentation mapping of cast Inconel™718 nickelbased superalloy: influence of the Nb concentration(2)
Release time: 2022-01-14
The alloy was heat treated to three different temper conditions: i.Solubilisation (S): 965 ºC for 1 hour followed by oil quenching. ii.Peak aging precipitation (P): following solubilisation treatment, 720 ºC during 8 h followed by 2 h ...
Views
High-throughput nanoindentation mapping of cast IN718 nickelbased superalloy: influence of the Nb concentration(1)
Release time: 2021-03-18
Abstract A high-throughput correlative study of the local mechanical properties, chemical composition and crystallographic orientation has been carried out in selected areas of cast Inconel 718 specimens subjected to three different...
Views
Geometry of Remeltings and Efficiency of the Surface Remelting Process Applied to Cobalt Alloy Castings(2)
Release time: 2021-03-11
Geometry of remeltings Geometry of the obtained surface remeltings was examined on a cross-section perpendicular to the longitudinal axis of remeltings (Fig. 1). Specimens were cut on the metallographic cut-off machine Labotom 3 of Stru...
Views
Geometry of Remeltings and Efficiency of the Surface Remelting Process Applied to Cobalt Alloy Castings(1)
Release time: 2021-03-10
The paper summarises results of measurements of remelting area geometry, thermal efficiency and melting efficiency characterising the surface remelting process applied to castings of MAR-M-509 cobalt alloy. The remelting process was carr...
Views
Technology of laser repair welding of nickel superalloy inner flaps of jet engine (2)
Release time: 2021-03-08
Fixtures are designed to guide and locate the moving tool and also to accommodate several assemblies according to the size of the component. The stator bladeassemblies can be welded using a different way as well in which the weld procedu...
Views
Technology of laser repair welding of nickel superalloy inner flaps of jet(1)
Release time: 2021-03-05
SUPER ALLOYSuper alloy is a special kind of alloy having some characteristic properties such as highmechanical strength, resistance to Creep, excellent surface stability, corrosion resistant(usually provided by Chromium and Aluminiu...
Views
Gas turbine castings (2)
Release time: 2021-03-04
In Aerospace One of the most prevailing components in the aerospace equipment that used investment casting process to produce superalloy castings is used in Jet engines. Fig. 33 (a) and (b) shows the layout of the Jet engine, which consi...
Views
Gas turbine castings (1)
Release time: 2021-03-04
Gas turbine blades have to resist severe conditions such as elevated temperatures, high centrifugal forces and oxidation. Nowadays directional solidification (DS) and single crystal (SX) methods are used to cast the blades because conven...
Views
The influence of casting factors on castings(2)
Release time: 2021-03-01
Secondary Gamma Prime Increased heat inputs, in terms of higher pouring temperature and mold temperature, result in reduced particle size of secondary gamma prime. The level of vacuum and the number of shell coats affect the morphology o...
Views
The influence of casting factors on castings(1)
Release time: 2021-02-26
It is widely believed that there is a need for a better correlation between casting and microstructure of Ni-superalloys.Generally, the microstructure and properties of investment castings are influenced by the following parameters: 1.Su...
Views
Investment casting
Release time: 2021-02-25
Investment casting Development of new blade alloys to achieve high temperature performance has required parallel development in alloy processing. Before the 1940s, gas turbine engine blades were iron-based alloys through cold wrought. In...
Views
<<
1
2
…
4
…
8
9
>>